DeLaval VMS 2008 Instruction Book page 86

Start button
Pick-up box
2007-12-18
DeLaval voluntary milking system VMS
Milk-pump
button
Stop button
1. To pump the milk in the receiver tank to
the storage tank, press the milk-pump
button on the pick-up box.
2. Stir the milk inside the storage tank for at
least two minutes.
3. When the stirring is complete, switch off
the cooling.
4. If desired, take a milk sample via the
manhole at the top of the tank.
5. Remove the grey cap from the tank outlet.
6. Connect the hose of the dairy truck to the
tank outlet.
7. To start the tank emptying, open the
pick-up valve by pressing the Start button
on the pick-up box. (The Stop button closes
the valve.)
9. When the tank is empty, disconnect the
hose from the tank outlet.
10. Fit the black cap on the tank outlet.
9. Start the tank cleaning.
94897201.pdf
Operation
78(198)