Software functions..................15 PC software functions..................15 Application functions..................15 Web functions....................16 GPL code statement ...................... 16 Technical data of the FMC-IP1.1..................17 Installation............................20 DeLaval farm monitoring camera FMC-IP1.1 Installing the software..................... 20 Connecting the camera to a network................20 Connecting the camera to a network with Wi-Fi..........
Page 4
DeLaval farm monitoring camera FMC-IP1.1 Table of contents Viewing multiple video feeds................29 Scheduling recording for multiple view............31 Viewing recorded videos................. 32 Viewing recorded photographs............... 35 Camera software settings................38 Using the iOS application....................44 "My Camera" overview................... 44 "Edit Camera"...
2 Disclaimer The information, instructions and parts listed are applicable and up-to-date when issued. DeLaval reserves the right to make changes without notice. 3 Precautionary statements Precautionary statements are safety-related warning messages intended to prevent the incorrect or hazardous use of equipment, machinery or software.
DeLaval farm monitoring camera FMC-IP1.1 Safety precautions Note! Indicates important information related to a situation or behaviour where a non-immediate or potential hazard presents a risk of damage to property or equipment. This symbol indicates risk of injury. This symbol indicates risk of electric shock.
DeLaval farm monitoring camera FMC-IP1.1 Safety precautions Warning! Keep safety signs legible Read all the safety signs on the machine and in this manual. Replace any lost or damaged signs. Keep safety signs clean and legible at all times. Mandatory! Read the instructions carefully before using the equipment.
Waste Electrical & Electronic Equip- ment (WEEE) Fig. 2: Power adapter type plate. 7 Warranty The warranty period for the DeLaval farm moni- toring camera FMC-IP1.1 is three years. The requirement for approved warranty claim: Add the UID code in AWACS.
Page 9
DeLaval farm monitoring camera FMC-IP1.1 Safety precautions Note! DeLaval will not take any responsibility for damage resulting from faulty installation, operation, or for improper or inadequate care and maintenance. Note! Modification may create risks not covered by the original construction. Do not make any modifications which has not been approved by DeLaval.
General description DeLaval farm monitoring camera FMC-IP1.1 1 Overview of the FMC-IP1.1 DeLaval farm monitoring camera FMC-IP1.1 is a full HD supervision camera system for barns, stables or outdoor areas especially made for tough barn environment. The camera software provides a real time view, several areas can be monitored at the same time.
DeLaval farm monitoring camera FMC-IP1.1 General description 1.1 Parts of the camera Fig. 3: Parts of the camera. A: Camera foot B: Infrared LED C: Reset button D: Day/night sensor E: Lens F: Protective hood G: Antenna H: Microphone J: Power connection; polarity: positive - centre,...
Page 12
DeLaval farm monitoring camera FMC-IP1.1 General description The extended function of FMC- IP1.1 includes PoE (Power over Ethernet). Note! Maximum number of cameras is 100 in the software. The camera needs to be placed within Wi-Fi range, see Fig. 4; all obstacles between the cameras and the router affects the quality of the video feed.
PoE devices are equipped with a PD port (Pow- ered Device), which is a network port made for receiving both data and power. FMC-IP1.1 is a PD device. A non-PoE router does not have the capability to power a PD device trough its network ports.
DeLaval farm monitoring camera FMC-IP1.1 General description 4 LEDs The camera is equipped with two LEDs that indicates different connectivity states. Behaviour Description Green Illuminates for a Power on few seconds, then is off for 4 seconds Flashes irregu- Successful cable larly connection.
DeLaval farm monitoring camera FMC-IP1.1 General description The FMC-IP1.1 software is available for PC or a smart device and can be downloaded for free from the following locations: www.delavalfmc.com/FMC-IP1 - PC Google Play - Android Apple Store - iOS Note! The DeLaval FMC application is not sup- ported by Macintosh computers.
DeLaval farm monitoring camera FMC-IP1.1 General description Recording and viewing videos Scheduled recording Motion detection Camera setting (limited) 6.4 Web functions Real time video feed (limited) Taking and viewing photographs (limited) Scheduled recording (full access) Motion detection (limited) Camera setting...
DeLaval farm monitoring camera FMC-IP1.1 General description 8 Technical data of the FMC-IP1.1 Camera Image sensor 2.7" CMOS OV 2710 Image active array size 1920 x 1080 Viewing angle Diagonal: 130° Horizontal: 85° Vertical: 55° Focal length 2.8 mm Aperture F2.0...
Page 18
DeLaval farm monitoring camera FMC-IP1.1 General description Audio compression Built-in microphone Electret Condenser Microphone Simultaneous viewers Authentication ID/Password, Administrator/General User (up to Network protocols TCP, UDP, IP, ARP, I CMP, DHCP, DNS, HTTP, FTP, SMTP, NTP, UPnP, DDNS Stream type...
DeLaval farm monitoring camera FMC-IP1.1 Installation Installation DeLaval farm monitoring camera FMC-IP1.1 1 Installing the software 1. Turn on the PC or smart device. 2. Download the software FMC-IP1 from www.delavalfmc.com/FMC-IP1 for PC from AppStore for iOS from Google Play for Android.
DeLaval farm monitoring camera FMC-IP1.1 Installation 2.1 Connecting the camera to a network with Wi-Fi 1. Connect the power adaptor cable ("2") to the “Y” cable ("3"). 2. Connect the network cable ("4") and the router. 3. Plug the power adaptor connected to the camera into the power socket.
PoE/PoE+ There are two ways of connecting the camera to the PoE/PoE+ network by using: PoE router. For DeLaval network, it is recommended to use Ubiquiti Edge Router ER-4. PoE switch For DeLaval network, it is recommended to use Ethernet office switch PoE 8 ports (2150018378).
DeLaval farm monitoring camera FMC-IP1.1 Installation 3 Adding a camera to the PC soft- ware 1. Open the PC software, see Ä Chapter 1 "Installing the software" on page 20. 2. Click the "Camera" icon in the menu bar, see A in Fig. 11.
DeLaval farm monitoring camera FMC-IP1.1 Installation Note! For adding more cameras repeat the above procedure. 4 Adding a camera to the iOS application 1. Tap "Add ". 2. Enter a suitable name for the camera. 3. Enter the camera "UID" code.
DeLaval farm monitoring camera FMC-IP1.1 Installation 5 Adding a camera to the Android application 1. Tap "+" to add camera. 2. Enter the camera "UID" code. Note! The "UID" code can be found on the quick guide or on the camera.
DeLaval farm monitoring camera FMC-IP1.1 Installation 6 Inserting a memory card 1. Slide off the protecting hood. 2. Unscrew the front part of the camera housing. 3. Separate the front part of the camera housing. 4. Insert the memory card into the memory card holder.
DeLaval farm monitoring camera FMC-IP1.1 Operation Operation DeLaval farm monitoring camera FMC-IP1.1 1 Using the PC software 1.1 Video feed Fig. 16: Viewing the video feed screen. Menu bar Zoom out Video stream Maximise window Screen capture Volume on/off Record video...
Page 28
DeLaval farm monitoring camera FMC-IP1.1 Operation ð A screen with available cameras opens. 2. Double-click the chosen camera to start the video feed. 3. Click D to start recording. 4. Click C to capture the screen. 5. Click E to zoom in. Click on F to zoom out.
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.2 Viewing multiple video feeds Fig. 17: Multiple video feed screen. Menu bar Volume on/off Video streams Change volume Multiple view 1. Click the "Multiple view" icon in the menu bar. ð The "Multiple view" icon becomes red.
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.3 Scheduling recording for multiple view Fig. 18: " Multiple view " menu. 1. Open the "Multiple view" menu. Note! Scheduling recording for multiple view works only as long the "Multiple view" is active. Changing the active menu window results in the recording failure.
DeLaval farm monitoring camera FMC-IP1.1 Operation 6. Click "Scheduled recording setting" from the menu. 7. Add new schedule. It is possible to add up to 8 schedules. 8. Click "Enable". 9. Select days and/or time when recording should be active.
VMS and save the Wi-Fi settings. For more Ä Chapter 4 "Using the cam- information, see era setting webpage" on page 70. The following settings are available for different areas in the PC application ("DeLaval FMC-IP" software): "Video Settings" "Notification Settings" "Scheduled Recording to SD-card"...
Page 39
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.6.1 "Video Settings" menu 1. Expand "Video Settings". 2. Adjust "Video Quality" with the slider. 3. Select the most suitable orientation in "Video Flip". 4. Click the folder in "Live recording destination" to select the suitable place for recordings.
Page 40
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.6.2.2 Setting the sending e-mail account 1. Expand "Notification Settings". 2. Click the "Settings" (cogwheel) icon in "Sending e-mail address setting" to set sending e-mail address. The PC software can create an e-mail with a snapshot when motion detection is activated and alarming.
Page 41
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.6.3 "Scheduled Recording to SD-card" menu 1. Note! Recording function does not allow recording after midnight. To record during this time, 24 hours must be recorded. Expand "Scheduled Recording". 2. Click the "Plus" icon.
Page 42
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.6.5 "Camera Settings" menu 1. Expand "Camera Settings". 2. Click the selected network (B). 3. Enter the network password (C). Note! The program will not give an error message if a wrong network password is entered.
Page 43
DeLaval farm monitoring camera FMC-IP1.1 Operation 1.6.6 "About Camera" menu n Expand "About Camera". ð Information about selected camera is available. Menu item Description " Model " Type of the camera (FMC-IP1 or FMC-IP1.1) " Version " Version of the firmware used for the selected camera.
DeLaval farm monitoring camera FMC-IP1.1 Operation 2 Using the iOS application 2.1 "My Camera" overview 1. Swipe left to show the settings. 2. Tap the icon to open the respective menu: Fig. 25: "My Camera" overview. A: Camera List B: Version of the application C: Selected camera D: "...
Page 45
DeLaval farm monitoring camera FMC-IP1.1 Operation "Video" menu Open video menu. Tap to take a photograph. "Video "menu Tap to record a video. Tap to unmute the tone. The tone is muted by default. "Audio Mode" menu "Alarm Detection" menu Turn on or cancel the alarm detection.
DeLaval farm monitoring camera FMC-IP1.1 Operation 2.2 "Edit Camera" menu "Edit Camera" menu allows to: Check UID of the camera. Check and change the camera name. Reconnect the camera. Change the account settings and password. All functions are available only when the cam- era is connected or installed with the applica- tion.
Page 47
DeLaval farm monitoring camera FMC-IP1.1 Operation 2.2.3 Changing the advanced settings 1. Tap "Advanced Settings". ð "Advanced Settings" menu opens. 2. Select one of the available options to change the respective settings. 2.2.3.1 "Wi-Fi Networks" menu 1. In the "Advanced Settings" menu, tap "Wi- Fi Setting".
Page 49
DeLaval farm monitoring camera FMC-IP1.1 Operation "Primary Use to view the camera Stream" with PC application. Image size: 1920x2080 Frame rate: 25fps, H.264/MPEG4 bit-rate: 2Mbit/s. "Secondary Use to view the camera Stream" with mobile phone application. This option is used...
Page 50
DeLaval farm monitoring camera FMC-IP1.1 Operation 2.2.3.3 "Device Misc" menu 1. In the "Advanced Settings" menu, tap "Device Misc". ð "Device Misc" menu opens. 2. Select one of the available options to change the respective settings: "Microphone" Adjust the level of the microphone sensivity.
Page 51
DeLaval farm monitoring camera FMC-IP1.1 Operation 2.2.3.4 "Alarm Actions" menu 1. In the "Advanced Settings" menu, tap "Alarm Actions". ð "Alarm Actions" menu opens. 2. Select one of the available options to change the respective settings: "Global Setting" "Motion Detection"...
Page 52
DeLaval farm monitoring camera FMC-IP1.1 Operation "Global Setting" 3. Tap one of the options to change settings. "Global Alarm" Activate or deactivate the alarm of the cam- era. Set to "ON" to enable motion detection. "Global Task" Activate or deactivate...
Page 53
DeLaval farm monitoring camera FMC-IP1.1 Operation " Window" Select the window position: 1= full window 2= top right cor- 3= bottom left corner 4= bottom right corner "Alarm On" Turn on the alarm notification when the motion is detec- ted.
Page 54
DeLaval farm monitoring camera FMC-IP1.1 Operation "Alarm Recording" 5. Tap one of the options to change settings. "Alarm Recording" Activate or deacti- vate the alarm recording of the camera. Recording starts when the motion detection alarm goes off. "Recording Stream" Select stream to be recorded.
Page 55
DeLaval farm monitoring camera FMC-IP1.1 Operation "Alarm Snapshot" 6. Tap one of the options to change settings. "Alarm Snapshot" Activate or deacti- vate the alarm snapshot. "Snapshot Stream" Select stream to snapshot. "Snapshot Set the snapshot Duration(sec)" duration. "Snapshot Set the snapshot Interval(sec)"...
Page 56
DeLaval farm monitoring camera FMC-IP1.1 Operation "Alarm Email" 7. Turn on e-mail notification by tapping the "Email Sending""On/off" icon. 8. Enter the sending e-mail account address. 9. Enter the sending e-mail account pass- word. Note! The sending and the receiving email accounts cannot be the same.
DeLaval farm monitoring camera FMC-IP1.1 Operation 2.2.3.6 "Login Account" menu 1. In the "Advanced Settings" menu, tap "Login Account". ð "Login Account" menu opens. 2. See and change the admin password. 2.2.3.7 "About Devices" 1. In the "Advanced Settings" menu, tap "About Devices".
DeLaval farm monitoring camera FMC-IP1.1 Operation 2.4 "Alarm Records" menu 1. Tap "Alarm Records". 2. Swipe left to show the settings. 3. Tap the icon to open the respective menu: Show list of alarms. Turn on or turn off the alarm notification.
DeLaval farm monitoring camera FMC-IP1.1 Operation 3 Using the Android application 3.1 "My Camera" overview 1. Swipe left to show the settings. 2. Tap the icon to open the respective menu: Fig. 26: Android application overview. A: Camera List B: Version of the application C: Selected camera D: "...
Page 60
DeLaval farm monitoring camera FMC-IP1.1 Operation "Video" menu Open video menu. Tap to take a photograph. "Video" menu Tap to record a video. Tap to unmute the tone. The tone is muted by default. Tap to see saved photographs and videos recordings.
DeLaval farm monitoring camera FMC-IP1.1 Operation 3.2 "Edit Camera" menu "Edit Camera" menu allows to: Check UID of the camera. Check and change the camera name. Reconnect the camera. Change the account settings and password. All functions are available only when the cam- era is connected or installed with the applica- tion.
Page 62
DeLaval farm monitoring camera FMC-IP1.1 Operation 3.2.3 Changing the advanced settings 1. Tap "Advanced Settings". ð "Advanced Settings" menu opens. 2. Select one of the available options to change the respective settings. 3.2.3.1 "Wi-Fi Setting" menu 1. In the "Advanced Settings" menu, tap "Wi- Fi Setting".
Page 64
DeLaval farm monitoring camera FMC-IP1.1 Operation "Primary Use to view the camera Stream" with PC application. Image size: 1920x2080 Frame rate: 25fps, H.264/MPEG4 bit-rate: 2Mbit/s. "Secondary Use to view the camera Stream" with mobile phone application. This option is used...
Page 65
DeLaval farm monitoring camera FMC-IP1.1 Operation 3.2.3.3 "Device Misc" menu 1. In the "Advanced Settings" menu, tap "Device Misc". ð "Device Misc" menu opens. 2. Select one of the available options to change the respective settings: "Microphone" Adjust the level of the microphone sensivity.
Page 66
DeLaval farm monitoring camera FMC-IP1.1 Operation 3.2.3.4 "Alarm Actions" menu 1. In the "Advanced Settings" menu, tap "Alarm Actions". ð "Alarm Actions" menu opens. 2. Select one of the available options to change the respective settings: "Global Setting" "Motion Detection"...
Page 67
DeLaval farm monitoring camera FMC-IP1.1 Operation "Motion Detection" 4. Note! "Motion Detection" is available only when "Global Alarm" and "Global Task" are set to "ON". "Motion Detection" triggers motion detec- tion in different parts of the video or image. Tap one of the options to change settings.
Page 68
DeLaval farm monitoring camera FMC-IP1.1 Operation "Alarm Recording" 5. Tap one of the options to change settings. "Alarm Recording" Activate or deacti- vate the alarm recording of the camera. Recording starts when the motion detection alarm goes off. "Recording Stream" Select stream to be recorded.
DeLaval farm monitoring camera FMC-IP1.1 Operation "Alarm Email" 7. Turn on e-mail notification by tapping the "On/off" icon. 8. Enter the sending e-mail account address. 9. Enter the sending e-mail account pass- word. Note! The sending and the receiving email accounts cannot be the same.
DeLaval farm monitoring camera FMC-IP1.1 Operation 3.4 "Alarm Records" menu 1. Tap "Alarm Records". 2. Swipe left to show the settings. 3. Tap the icon to open the respective menu: Turn on or turn off the alarm notification. Show list of alarms.
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.2 Accessing the camera setting web- page with a PC application Fig. 27 1. Open the PC software. 2. Click the "Settings" icon in the menu bar. 3. Click the selected camera. 4. Expand "About Camera".
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.3 Accessing the camera setting web- page with a mobile application 1. Open the mobile application. 2. Tap "My Camera". 3. Select camera from the list. 4. Swipe left to show the settings. 5. Tap "Edit Camera è Advanced Settings è...
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4 Camera setting webpage overview Fig. 28: Overview of the camera setting webpage. "System Information" menu. Navigation bar "Live View" Shows the live view from the camera. "Wizard" Camera configuration wizard. "System" Shows all information about the system.
Page 74
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.1 "Camera" menu 4.4.1.1 "Camera Setup" menu 1. Expand "Camera". 2. Click "Camera Setup". 3. Click one of the options to change set- tings. "System" Enable privacy mode. Disable power LED light. "Camera" Set the light frequency.
Page 75
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.1.3 "Image Setup" menu 1. Expand "Camera". 2. Click "Image Setup". 3. Click one of the options to change set- tings: Brightness Contrast Saturation Sharpness Auto exposure target Auto exposure speed 4.4.1.4 "OSD Setup" menu 1.
Page 76
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.2 "Network" menu 4.4.2.1 "Wireless Setup" menu 1. Expand "Network". 2. Click "Wireless Setup". 3. Click one of the options to change set- tings. "Wireless" Enable or disable a wireless connection. "SSID" Set the SSID.
Page 77
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.2.4 "UPNP Setup" menu 1. Expand "Network". 2. Click "UPNP Setup". 3. Click one of the options to change set- tings. "UPNP" Enable or disable the UPNP. "Gateway Enable or disable the HTTP/RTSP gateway forwarding of port HTTP/RTSP.
Page 78
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.3.2 "Browse Setup" menu 1. Expand "Storage". 2. Click "Browse Setup". 3. Define different recording schedules to specific files. 4.4.3.3 "Format SD Card" menu 1. Expand "Storage". 2. Click "Format SD Card". 3. Remove all data from the SD card.
Page 79
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.4.2 "Motion Detection" menu Note! To correctly display this menu, Adobe Flash Player is required. 1. Expand "Task". 2. Click "Motion Detection". 3. Configure settings related to the motion detection. 4.4.4.3 "Schedule Setup" menu 1.
Page 80
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.5 "Tools" menu 4.4.5.1 "System Identity" menu 1. Expand "Tools". 2. Click "System Identity". 3. Setup the name of the system. 4.4.5.2 "User Management" menu 1. Expand "Tools". 2. Click "User Management". 3. Click one of the options to change set- tings.
Page 81
DeLaval farm monitoring camera FMC-IP1.1 Operation 4.4.5.4 "Backup or Reset" menu 1. Expand "Tools". 2. Click "Backup or Reset". 3. Click one of the options to change set- tings. Define settings for the backup and reset. Restore configuration of the cameras.
DeLaval farm monitoring camera FMC-IP1.1 Troubleshooting Troubleshooting DeLaval farm monitoring camera FMC-IP1.1 1 Troubleshooting table Symptom Cause Action The camera does not work The camera has no power Check the power adapter and the LED on the camera supply. cable.
Page 83
DeLaval farm monitoring camera FMC-IP1.1 Troubleshooting Symptom Cause Action Bad image quality. Bad reception. Place the camera within Wi-Fi range (see "Installa- tion tips")*. Set the camera to HD quality. In the app, go to "Advanced settings è Video quality è...
Page 84
DeLaval farm monitoring camera FMC-IP1.1 Troubleshooting Symptom Cause Action Bad Internet connection/ Check the bandwidth on bandwidth. the site http:// www.bredbandskollen.se/ en/. The recommended upload speed for basic acceptable performance is 1 Mbit/s. Change settings for the camera: – Lower the JPEG snap-...
DeLaval farm monitoring camera FMC-IP1.1 Troubleshooting 2 Procedure when a problem occurs 2.1 " The camera is not online " error During installation "The camera is not online, please check status!" appears. 1. Double check the router connection. 2. Click the green "Check" icon to confirm.
Page 86
DeLaval farm monitoring camera FMC-IP1.1 Troubleshooting 10.Enter the following data: Item Description " Wireless " Select "Enable" to activate the wireless. " SSID " Enter the network identifica- tor. " Mode " Select the mode Infra- structure. " Security Select the security mode.
Page 87
Tetra Laval Holdings & Finance S. A. and DeLaval is a registered trade/service mark of DeLaval Holding AB.
Page 88
DeLaval International AB www.delaval.com Box 39 SE-147 21 Tumba SWEDEN...