DeLaval VMS 2008 Instruction Book page 184

M M m m Alarm text Alarm text
3 3 130 OCC: No water in 130 OCC: No water in
funnel or funnel or
leakage/stop in leakage/stop in
hose or valve hose or valve
failure failure
3 3 131 OCC: No milk in 131 OCC: No milk in
funnel or funnel or
leakage/stop in leakage/stop in
hose or valve hose or valve
failure failure
3 3 132 OCC: No answer 132 OCC: No answer
from the DCC from the DCC
3 3 133 OCC: The DCC 133 OCC: The DCC
can't count the can't count the
cells, some cells, some
parameter setting parameter setting
is wrong is wrong
3 3 134 OCC: Can't clean 134 OCC: Can't clean
the cuvett, it is to the cuvett, it is to
dirty dirty
3 3 135 OCC: Can't 135 OCC: Can't
recover, service recover, service
needed! needed!
3 3 136 OCC: Can't get 136 OCC: Can't get
milk into funnel milk into funnel
2007-12-18
DeLaval voluntary milking system VMS
Type Type Meaning Meaning
Deviation Deviation The OCC can't detect any water The OCC can't detect any water
Deviation Deviation The OCC can't detect any milk. The OCC can't detect any milk.
Deviation Deviation The DCC does not answer on the The DCC does not answer on the
Alcom bus Alcom bus
Deviation Deviation Some parameter in the DCC is Some parameter in the DCC is
wrong so that the DCC can not wrong so that the DCC can not
perform a cell count. perform a cell count.
Deviation Deviation The cuvette is to dirty to many The cuvette is to dirty to many
times in a row times in a row
User User The OCC has tried to run two self The OCC has tried to run two self
notication notication test without any luck. It can't test without any luck. It can't
recover from the faults. recover from the faults.
User User There is not enough milk in funnel. There is not enough milk in funnel.
notication notication
Troubleshooting
Action Action
Is the water to the OCC turned on (is Is the water to the OCC turned on (is
the teat cleaner getting water?). Try the teat cleaner getting water?). Try
press the water button in the cabinet - press the water button in the cabinet -
is there any water coming into the is there any water coming into the
funnel? Try run a self test from the funnel? Try run a self test from the
touch screen. If this does not help, touch screen. If this does not help,
check hoses and valves manually. check hoses and valves manually.
Maybe this cow has yield very little Maybe this cow has yield very little
milk, then there might not be enough in milk, then there might not be enough in
the funnel to perform a measure. If this the funnel to perform a measure. If this
is not the case check hoses and valves is not the case check hoses and valves
manually. manually.
Run prime and self test from the touch Run prime and self test from the touch
screen. Restart MS. If it still does not screen. Restart MS. If it still does not
work - call service engineer. Is it work - call service engineer. Is it
powered on? Try "DCC on/off" from the powered on? Try "DCC on/off" from the
touch screen, and then just try to read touch screen, and then just try to read
some parameter to check that it has some parameter to check that it has
come to live. If this does not help come to live. If this does not help
disconnect/connect the power to the disconnect/connect the power to the
DCC module. DCC module.
Run prime and self test from the touch Run prime and self test from the touch
screen. Go through the parameter list screen. Go through the parameter list
from the touch screen to see if some from the touch screen to see if some
parameter is set to an abnormal value parameter is set to an abnormal value
(default values should be available (default values should be available
from helpdesk?) from helpdesk?)
Run prime and self test from the touch Run prime and self test from the touch
screen.If this does not help you need to screen.If this does not help you need to
manually check the hoses and valves manually check the hoses and valves
to find the blockage. If it still does not to find the blockage. If it still does not
work - call for service engineer. work - call for service engineer.
Run prime and self test from the touch Run prime and self test from the touch
screen. Manually check the OCC. Is screen. Manually check the OCC. Is
the waste bottle empty? Is there any the waste bottle empty? Is there any
reagent/hypochlorite in the bottle? Is reagent/hypochlorite in the bottle? Is
the water ok? Replace hoses if the water ok? Replace hoses if
needed. Check all valves (from touch needed. Check all valves (from touch
screen). Try disconnect/connect power screen). Try disconnect/connect power
to the OCC. Run prime and self test to the OCC. Run prime and self test
from touch screen. from touch screen.
None required. None required.
94897201.pdf
176(198)