Ecom EN3 Operating Instructions Manual page 54

The following settings are available in the Adjustments / Internal / WiFi menu if the instrument
has been defined as an access point:
Parameter
Start / Stop WLAN
(Without) Auto Connect
Channel
Security
The following settings are available in the Adjustments / Internal / WiFi menu if the instrument
has been defined as an existing network:
Parameter
Start / Stop WLAN
(Without) Auto Connect
Existing Network
WPA-Password
The following adjustments are available in the Adjustments / Internal / Printout menu:
Parameter
Footer for the Printout
Selection of measurement and
calculation values for printout
Hint
The footer of the printout can be defined as desired, e.g. to print out the
company address of the instrument user on every printout of the measured
values.
Page 54
Meaning
Activate the
WiFi interface
(available only with deactivated
Auto Connect)
Enable / Disable automatic
connection
Set which radio channel is to be
used for the communication
Assign a password to secure
the WiFi connection
Meaning
Activate the
WiFi interface
(available only with deactivated
Auto Connect)
Enable / Disable automatic
connection
Search for Existing Network
Assign a password to secure
the WiFi connection
Meaning
To adjust the footer of the printout, proceed as follows:
1. Activate character selection list with <F4>.
2. Select keyboard type with <F3>
(4 different keyboards available).
3. Use the cursor keys to select the desired character (selected
character is outlined by black background).
4. Confirm selection while pressing <Enter>.
5. Repeat procedure until desired text is complete.
6. Once input for line 1 is completed, deactivate the characters
selection mode with <F4> and move to the second line with the
cursor key <Down>.
7. Once all lines have been processed as desired, exit the menu with
<ESC>.
Adjustment
Start WiFi, Stop WiFi
Yes, No
1 ... 13
Yes, No
Password entry
Adjustment
Start WiFi, Stop WiFi
Yes, No
Password entry
Adjustment
8 x 24 signs
Factory setting
-
Yes
1
No
1234567890
Factory setting
-
Yes
Factory setting
ecom-EN3