Ecom EN3 Operating Instructions Manual page 53

The following adjustments are available in the Adjustments / Internal / Values options menu:
Parameter
Temperature
Excess air
Eff.(C)
Draught
The following adjustments are available in the Adjustments / Internal / USB menu:
Parameter
Transfer speed
Protocol
The following settings are predefined in the Settings / Internal / Bluetooth (BLE) menu and can
NOT be changed:
Parameter
Transfer speed
Protocol
The following adjustments are available in the Adjustments / Internal / WLAN menu:
Parameter
Access Point
OR
Existing Network
Hint
The Access Point setting is necessary to connect the ecom-EN3 to mobile
devices (smartphones, tablets) via the Wi-Fi interface.
ecom-EN3
Meaning
Not available at all instruments
Excess Air as proportionate
number or in %
Efficiency calculation with or
without condensation gain
Unit of draught measurement
Meaning
Meaning
Meaning
Set whether the instrument is to
be used as a WiFi access point
OR
to connect to an existing WiFi
network
Activate "Access Point" to connect the ecom-EN3 with mobile
devices via WLAN / Wi-Fi.
Adjustment
°C or °F
proportionate number or %
On, Off
hPa, mmH2O, "H2O, PSI, mbar
Adjustment
1200 ... 115200 Baud
DAS = DAS NT 2
Enhanced = DAS 5
---- = no protocol
Adjustment
115200 Baud
Enhanced
Adjustment
Access Point,
Existing Network
Factory setting
°C
proportionate number
On
hPa
Factory setting
38400 Baud
Enhanced
Factory setting
115200 Baud
Enhanced
Factory setting
Access Point
Page 53