Remote Control - Barco OverView D Series User Manual

5.1 Remote control

The projector can be RS232 remote-controlled or by the IR remote control unit (RCU)
How to use the RCU?
Point the front of the RCU directly at the screen.
When using the wireless remote control, make sure you are within the effective operating dis-
tance (30m, 100ft in a straight line). The remote control unit will not function properly if strong
light strikes the sensor window or if there are obstacles between the remote control unit and
the IR sensor.
Remote Control Unit
The remote control unit (RCU) includes a battery powered infrared (IR) transmitter that allows the user to control
the projector remotely.
The remote control is used for control, adaptation and set up. It includes automatic storing of the picture controls
(brightness, contrast ...) and the settings. Use the RCU to switch between standby and operational mode.
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
________________________________________________________________________
5. Controlling
Figure 5-1
IR Remote Control Unit (RCU)
5-2