Barco OverView D Series User Manual page 50

6.5.5 Runtimes
Operation Lamps
Active Lamp
Mode
History...
Lamp Optimization...
Runtimes...
Reset runtime
The Runtimes command displays a dialog where the runtimes of the lamps and the projector can be viewed.
To check the runtimes, proceed as follows:
•
Use the cursor key to highlight Runtimes.
•
Press Enter to select.
The Runtime dialog is displayed where the runtimes for both lamps and the projector itself are listed:
Runtime
Lamp Top
Lamp Bottom
Projector
6.5.6 Reset runtime
Operation
Active Lamp
Mode
History...
Lamp Optimization...
Runtimes...
Reset runtime
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
OverView DG
Status Brightness
125 hrs
159 hrs
380 hrs
OverView DG
Brightness
Lamps Status
_______________________________________________________________________
6. Menu structure
Figure 6-19
Lamps menu, Runtimes
Figure 6-20
dialog box Runtime
Figure 6-21
Reset runtime
6-13