Barco OverView D Series User Manual page 44

Auto
Selecting this command displays a dialog where the source to be displayed can be selected. This source will al-
ways have highest priority and be displayed whenever possible. In case the signal fails, the system automatically
switches to the other source. As soon as the originally selected source is live again, the system switches back to
it! Only in case neither source 1 nor source 2 are present, the background as selected in Operation | Background
(color bar, blue, black) will be displayed.
Auto Source Selection
Source 1
Source 2
Auto Switch
Selecting this command displays a dialog where the source to be displayed can be selected. As long as this
source is present, it also has priority. As soon the selected source is no longer available, the system switches to
the other source and also assigns priority to this source: Even if the originally displayed source will be present
again, it will not be switched to unless the other source fails.
Auto Switch Toggle - Source Selection
Source 1
Source 2
Source Selection: summary
In Manual mode and in Auto mode source selection will remain unless explicitely changed.
In Auto Switch mode source selection will remain as long as the selected source is present,
then automatically toggle to the other source.
The following tables lists all possible cases for connecting source 1 and source 2 as well as the behavior in each
of the operation modes: Manual, Auto, Auto Switch.
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
:
Operation menu,Source Selection, Auto
Operation menu,Source Selection, Auto Switch
________________________________________________________________________
6. Menu structure
Figure 6-9
Figure 6-10
6-7