Barco OverView D Series User Manual page 58

The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The
Timer can also be disabled.
To enable the timer and to set the countdown time proceed as follows:
•
User the cursor key to highlight Standby timer.
•
Press Enter to select
A dialog box is displayed:
Standby timer
Enabled
Disabled
Countdown to
The current status is indicated by a selected radio button.
To select the other status, proceed as follows:
•
Use the cursor key to highlight the desired status.
•
Press Enter to select.
To change the countdown time, proceed as follows:
•
Use the cursor keys to browse to the input field
•
Enter the desired value by means of the numeric keys on the RCU.
•
Press Enter to activate
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
0 sec
dialog box to control the Standby timer
_______________________________________________________________________
6. Menu structure
Figure 6-32
6-21