Barco OverView D Series User Manual page 100

Maintenance area
The floor space for OverView D is calculated from the basic area of the structure. A maintenance area must be
provided behind each OverView D over the complete width. This area must be permanently accessible. The exact
regulations for such a maintenance area can be obtained from the specifications for working premises. The fol-
lowing picture refers to OverView cDG67-DL.
With regards to maintenance area, please note that there may be laws concerning safety stan-
dards in your country!
The O V D Display Wall can have a linear or curved arrangement. Standard curved configurations are avail-
VER IEW
able with with angles of 3, 5, and 8 degrees for OverView cD, or 5 and 8 degrees for 50" systems..
Other angles on request!
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
Linear and polygonal set-up of OverView cDG67-DL
(All dimensions measured in millimeters!)
_______________________________________________________________________
10. Configuring notes
Figure 10-1
10-3