Barco OverView D Series User Manual page 51

After replacement of the lamp, the serial number of the new lamp has to be entered.
The command Reset runtime displays the dialog to enter the serial number.
To enter the serial number of the new lamp, proceed as follows:
•
Use the cursor key to highlight Reset runtime.
•
Press Enter to select.
The following dialog is displayed:
Reset lamp runtime
Enter serial number of new lamp
Lamp 1 000000
Accept
•
Use the cursor keys to highlight the input field.
•
Use the numeric keys on the RCU to enter the serial number of the new lamp.
•
Click Accept to activate the serial number.
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
Cancel
dialog to enter the serial number of a new lamp
_______________________________________________________________________
6. Menu structure
Figure 6-22
6-14