Now you can see the lamp, fixed into its position by means of a securing ring [1].
1
•
Press the securing ring, and turn it counterclockwise until the hooks are released from the guide rods.
•
Remove the securing ring
•
Withdraw the lamp module. While withdrawing, the plug is disconnected.
7.3.3.2 Inserting a lamp module
The following description applies if the lamp has already been removed as described above and the lamp cover
is still opened.
•
Fetch the lamp module on its housing. The power socket is on the right side.
•
Insert the lamp carefully. Take care that the "tubes" slide on the guide rods [2].
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
7. Maintenance and servicing
_______________________________________________________________________
Figure 7-4
inside the lamp housing
Figure 7-5
the securing ring
Figure 7-6
withdrawing the lamp module
7-11