Barco OverView D Series User Manual page 61

To increase the percentage, proceed as follows:
•
User the cursor key to activate the right white arrow
•
Click on the right white arrow until the desired percentage is reached.
To decrease the percentage, proceed as follows:
•
User the cursor key to activate the left white arrow
•
Click on the left white arrow until the desired percentage is reached.
The indicated DIS value does not change but remains constant.
Modification of the correction value has impact on the calibration of the DIS sensor, not
on the absolute value which has to be the same for all projection modules of the Display
Wall.
Due to the change in calibration, the brightness is adjusted while the common (all
projection modules of the Display Wall) DIS value persists.
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
_______________________________________________________________________
6. Menu structure
6-24