Assembly Group Posterior Truss Pad Pluggable; Crotch Cushion; Posterior Cushion; Side Posterior Truss Pads - SORG Boogie Drive Service Record

Boogie Drive
2.8 ASSEMBLY GROUP POSTERIOR
TRUSS PAD PLUGGABLE
ATTENTION
THE POSTERIOR TRUSS PAD MUST HAVE BEEN SET
TO THE INDIVIDUAL MEASUREMENTS OF THE CHILD/
ADOLESCENT AS EXACT AS POSSIBLE BEFORE THE FIRST
USE OF THE MOBILE STANDING DEVICE. WHEN THE USER
IS STANDING IN THE MOBILE STANDING DEVICE, ONLY
FINE ADJUSTMENTS ARE THEN ALLOWED TO BE MADE.

2.8.1 Crotch cushion

• (1) To adjust the HEIGHT loosen the clamp lever
(A),
• push the crotch cushion (B) to the desired position,
• retighten the clamp lever (A).

2.8.2 Posterior cushion

• (2) To adjust the HEIGHT loosen the clamp lever
(A),
• move the posterior truss pad (B) to the desired
position,
• retighten the clamp lever (A).
INFORMATION
The jamming of the posterior truss pad occurs BETWEEN
the drill holes of the holder (G). Should a back truss pad
be additionally used then the jamming occurs with a longer
clamp lever IN the drill holes.

2.8.3 Side posterior truss pads

• (2) To adjust the WIDTH loosen both set screws (C),
• move both holders (D) of the side posterior truss
pads (E) to the desired distance,
• retighten both set screws (C).
• (2) To adjust the DEPTH loosen the set screws (F)
on both sides,
• place both side posterior truss pads (E) in the
desired position,
• retighten both set screws (F).

2.8.4 Back truss pads

• (3) To adjust the HEIGHT loosen the clamp lever
(A),
• push the holder (B) of the back truss pad in the
desired position,
• retighten the clamp lever(A).
• (3) To adjust the DEPTH loosen the set screw (C),
• push the holder (D) in the desired position,
• retighten the set screw (C).
• (3) To adjust the ANGLE loosen the cap nut (E),
• place the back cushions (F) in the desired position,
• retighten the cap nut (E).
16
(1)
(2)
(A)
(C)
(G)
(3)
(C)
(D)
(B)
(A)
(A)
(B)
(B) (E)
(D)
(F)
(F)
(E)