Setting The Ret Input - Sony HDCU1000 Installation Manual

2-5-7. Setting the RET Input

Set the format of the return signal to be input to the RET1
to RET4 (HDCU1000/1080) connectors, or the RET 1 to
RET 3 (HDCU1500) connectors on the rear panel of the
HDCU1000/1080/1500.
Configure the setting using RETURN FORMAT on page
"S05" of the maintenance menu in MSU-900/950 or the
system menu of the HDCU1000/1080/1500.
n (HDCU1500 only)
Although the HDCU1500 only allows RET inputs (RET1
to 3), the signal input to the PROMPTER connector on the
rear panel can be used as the RET4 signal. (However, the
input format is VBS only.)
2-29 (E)
. IM/HDCU1000 Series