Connectors And Cables; Connector Input And Output Signals - Sony CCU-700A Maintenance Manual

1-2. Connectors and Cable

1-2. Connectors and Cables

1-2-1. Connector Input and Output Signals

Main connector input and output signals are shown below.
Rear panel
BNC connector : 75 Z
[Input signal]
• RET 1 to 4 140 IRE (1.0 V p-p) VBS or VS, loop
through
• REFERENCE 40 IRE (300 mV p-p), VBS,
Burst sync. loop through
• PROMPTER 140 IRE (1.0 V p-p), VBS,
loop through
• DIGITAL RET 1,2 (When BKP-7312 is connected.)
D1 format serial digital, SMPTE 259
M/ITU-R BT.656
[Output signal]
• R 700 mV p-p
• G 700 mV p-p
• B 700 mV p-p
• Y 100 IRE, 40 IRE (sync)
(for CCU-700A)
700 mV p-p, 300 mV p-p (sync)
(for CCU-700AP)
• R-Y 700 mV p-p (75 % Color bars)
(for CCU-700A)
525 mV p-p (75 % Color bars)
(for CCU-700AP)
• B-Y 700 mV p-p (75 % Color bars)
(for CCU-700A)
525 mV p-p (75 % Color bars)
(for CCU-700AP)
• CHARACTER 210 mV p-p, 300 mV p-p (sync)
• WF 1, 2 100 IRE/140 IRE (ENC)
(for CCU-700A)
700 mV p-p/1.0 V p-p (ENC)
(for CCU-700AP)
• PIX 1, 2 140 IRE (1.0 V p-p)
• VBS 1 to 3 140 IRE (1.0 V p-p)
• SYNC 300 mV p-p
• DIGITAL OUTPUT 1,2,3 (When BKP-7311 is connected.)
D1 format serial digital, SMPTE 259
M/ITU-R BT.656
1-2
[Input/Output signal]
COAX (Refer to Section 1-5.)
TRIAX King type (for CCU-700A)
Fischer type (for CCU-700AP)
MIC OUTPUT CH1/CH2 (3P, MALE)
(EXTERNAL VIEW)
No. Signal Specifications
1 MIC OUT (G) 0 dBu/-20 dBu
(Selectable with S201,
2 MIC OUT (Y)
S301/AT board)
3 MIC OUT (X)
RTS IN/OUT
RTS IN
(3P, FEMALE)
(EXTERNAL VIEW)
No. Signal Specifications
1 RTS (COMMON) 2.0 Vp-p 200 Z
2 RTS (ENG)
3 RTS (PROD)
(0 dBu=0.775 Vrms)
RTS OUT
(3P, MALE)
CCU-700A(UC)
CCU-700AP(CE)