Sony HDCU1000 Installation Manual page 91

Page Menu / Menu Image
C02 MONITOR2
<MONITOR 2> ?C02 TOP
LEVEL-GATE : OFF
Y-LEVEL1 49%~ 61% -12
Y-LEVEL2 74%~ 108% -25
SKIN-GATE : OFF :
MODURATION : OFF :
MARKER : OFF
: VISTA
C03
I/F SETUP
<I/F SETUP> ?C03 TOP
BOARD FRONT
SLOT1:DRX-5 => HIF-25
SLOT2:DRX-5 => HIF-25
SLOT3:DRX-5 => HIF-26
SLOT4:EN-159A=> VDA-64A
SLOT5:EN-159B=> VDA-64B
SLOT6:(NONE) => VDA-64C
C04 MIC/AUDIO
<MIC/AUDIO>
CHU MIC GAIN: (LOCAL)
CH1 : 60dB
CH2 : 60dB
MIC OUT
DELAY :
ANALOG OUT : MIC1/2
AES/EBU OUT: MIC1/2
AUDIO PACKE : AUTO (900)
: The settings in the box are default values.
. IM/HDCU1000 Series
Item
LEVEL-GATE
Y-LEVEL1
0
0
Y-LEVEL2
SKIN GATE
MODURATION
MARKER
BOARD
SLOT1
REAR
SLOT2
SLOT3
SLOT4
SLOT5
SLOT6
D-SUB15
CHARA/SYNC
CHU MIC GAIN
C04 TOP
CH1
CH2
0FS
MIC OUT
DELAY
ANALOG OUT
AES/EBU OUT
AUDIO PACKET
Setting Description
OFF /1/2/1&2 Sets the mode for the CCU Y-LEVEL-
GATE function.
0% to 49% to 64% to 108%
Sets upper and lower levels for Level-
Gate 1 detection.
_99 to _25 to +99 Sets the Zebra levels added to the
Level-Gate 1 detection width.
0% to 74% to 108% to 108% Sets upper and lower levels for Level-
Gate 2 detection.
_99 to _25 to +99 Sets the Zebra levels added to the
Level-Gate 2 detection width.
OFF /ON Turns ON/OFF Gate display for
SkinTone Detail detection.
_99 to 0 to +99 Sets SKIN GATE level.
OFF /ON Mask function ON/OFF switch at EDGE
CROP mode.
_99 to 0 to +99 Sets the image level of the mask portion.
OFF /ON Turns ON/OFF the MARKER signal.
4:3
13:9
14:9
EU VISTA
VISTA
CINEMA
FOLLOW DC
FRONT / REAR Detects and displays the board attached
BOARD NAME DISPLAY to front/rear of Slots 1 to 6 (HDCU1000)
BOARD NAME DISPLAY or Slots 1 to 3 (HDCU1500) or Slots 1 to
BOARD NAME DISPLAY 5 (HDCU1080).
BOARD NAME DISPLAY
BOARD NAME DISPLAY
BOARD NAME DISPLAY
(WFM-REMOTE)/ Displays the D-SUB 15-pin connector
(MIC-REMOTE) settings. (HDCU1500)
(CHARACTER)/(SYNC) Displays the CHARA/SYNC terminal
output settings. (HDCU1500)
(REMOTE/LOCAL) Displays local/remote for the camera
microphone amplifier settings.
20/30/40/50/ 60dB Sets amplifier gain for MIC-1 circuit.
20/30/40/50/ 60dB Sets amplifier gain for MIC-2 circuit.
0 to 3840FS Sets audio output phase for the camera
microphone.
MIC1/2 /AES/EBU Selects the MIC OUT ANALOG output.
MIC1/2 /AES/EBU Selects the MIC OUT DIGITAL output.
AUTO /700/900 Selects the Audio Packet operation
mode.
3-17 (E)