On-Board Indicator/Switch/Volume Functions - Sony HDCU1000 Installation Manual

1-7. On-board Indicator/Switch/Volume Functions

AT-167 board
A B
1
AT
D4
D411
2
D412
D409
S413
3
S403 S404 S405
REFERENCE
REF IN
S416
UN
LOCK
S419 S418
HD
RMT
S401
SD
S409
H PHASE
ADV
D410 S408
S402
DELAY
S420
Ref.No. Name
D4 POWER
D409 REF IN
D410 UNLOCK
D411 MS-LED
D412 LAN-LED *
S101 PRTCT
S102 DEBUG
S103 URA
S104 DEBUG
S401 REFERENCE
S402 H-PHASE
S403 H-Phase (STEP)
S404 V-Phase
* : This function has been added to software V1.10 and the later versions.
. IM/HDCU1000 Series
C D
S412
S410
S407
4
S406
5
Function
(Green) Illuminates when the power inside the AT board starts up correctly.
(Green) Illuminates when the reference signal is input and the external
synchronous mode is established.
(Red) Illuminates when CCU cannot lock the external reference signal in the
external synchronous mode.
(Red/green) Displays the access status to the Memory Stick.
Red light: Accessing the Memory Stick. Do not remove the Memory Stick.
Green light: The inserted Memory Stick can be removed.
(green) Illuminates when communication is in progress via the Ethernet connector.
Factory use
Factory use
Factory use
Factory use
Select the type of the synchronous signal to be connected to the REFERENCE
terminal of this unit with this switch.
HD : Synchronizes (SYNC) with the HD reference signal.
(Input frame frequency is automatically adjusted.)
REMOTE : Controls from the remote panel such as that on MSU.
SD : Synchronizes (SYNC) with the SD reference signal (BB).
The VBS OUT signal synchronizes (SC) when HKCU1001/1003 is installed.
When the setting of the switch and the type of the input synchronous signal does
not match, the LED of D410 (UNLOCK) illuminates.
Adjusts the H-phase.
Adjusts the level phase for the reference signal in steps.
Adjusts the vertical phase for the reference signal in line steps.
E F G
S411
RV702
RV701
AT-167 (Side A)
H J
Factory default setting
_
_
_
_
_
ON
OFF
OFF
OFF
REMOTE
8
8
1-13 (E)