Sony HDCU1000 Installation Manual page 29

DTX-5 board
A B
1
D103
DTX
CCU
D601
D602
2
D603
D604
CAM
D605
3
D606
CHARACTER
S603
S601
DISP
OFF
MENU
S604 4
CANCEL
ENTER
S602
S605
5
Ref.No. Name
D103 POWER
OPTICAL CONDITION -CCU (The received light level is displayed on CCU.)
D601
D602 CCU Opt-Condition
D603
OPTICAL CONDITION - CAM (The received light level is displayed on camera head.)
D604
D605 CAM Opt-Condition
D606
S601 1 - 8
S602
S603 CHARACTER
S604 CHARACTER
S605 CHARACTER
RV251 D1 ADJ
RV301 PROMPT1 LEV
RV701 PROMPT2 LEV
. IM/HDCU1000 Series
C D E F
RV251
Function
Illuminates when the power to the DTX board has correctly started.
(Green) _17 ± 1 dBm or more
(Yellow) _17 ± 1 dBm to _20 ± 1 dBm
(Red) _20 ± 1 dBm or less
(Green) _17 ± 1 dBm or more
(Yellow) _17 ± 1 dBm to _20 ± 1 dBm
(Red) _20 ± 1 dBm or less
Not used
Not used
Controls whether to turn on or off the mixing of characters to the Monitor output. OFF
DISP : Displays the DISP page that displays the CCU status.
OFF :Turn off the mixing of characters.
MENU : Displays the CCU-MENU page.
Cancels or executes MENU operations while CCU-MENU is displayed.
CANCEL: Use to cancel.
ENTER: Use to execute the content.
Changes the page setting of the character (DISP or MENU) mixed to
the Monitor output with Up/Down
Adjusts the free-run frequency of the IC that converts the SD-SDI return
signal from serial to parallel.
Adjusts the video level of prompter 1 system.
Adjusts the video level of prompter 2 system.
G H J
RV301
RV701
DTX-5 (Side A)
Factory default setting
_
_
_
_
_
_
_
ALL OFF
0
_
_
1-23 (E)