Replacing The Fuse (Hdcu1000/1080); Installation Position Of The Option Board - Sony HDCU1000 Installation Manual

1-8-2. Replacing the Fuse (HDCU1000/1080)

w
The components marked ! are critical to safe operation. If
you replace with parts other than the specified ones, a fire
or electric shock may result from that.
Replacement Part
MAIN fuse
Part : Fuse (3.15 A, 250 V)
Part No. : ! 1-576-230-51
CAMERA fuse
For UC
100 to 120 V
Part : Fuse ( 6.3 A, 250 V)
Part No. : ! 1-576-233-51
For CE, CN
220 to 240 V
Part : Fuse (4 A, 250 V)
Part No. : ! 1-576-231-51
Replacement Procedure
1. Remove the PS panel assembly.
(Refer to Section 1-8-1.)
2. Insert a flat-blade screwdriver into the groove of the
fuse holder, and rotate it in the direction of arrow A
(by about 90d) to unlock. (Fig. 1)
3. Remove the fuse with the fuse holder. (Fig. 2)
4. Remove the fuse from the fuse holder. (Fig. 3)
CAMERA fuse
MAIN fuse
Two fuse holders
Fig.1
Flat-blade
screwdriver
A
Fuse holder
Fig.2
Fuse holder
1-26 (E)
Groove
Fig.3
Fuse
Fuse holder
5. Attach the fuse in the reverse order.
n
A spring is already attached in the fuse holder. When
attaching a new fuse, rotate the flat-blade screwdriver
in the direction of arrow C (by about 90d) while
pressing it in the direction of arrow B to lock the fuse
holder.
Flat-blade
screwdriver
1-9. Installation Position of the Option
Board
The following optional boards can be available for HDCU.
Use different slots for each board and set the switches
respectively.
For the details, refer to Section 2-1, "System Connection".
Model
HKCU1001
SD Analog Interface Unit
HKCU1003
*
MULTI Interface Unit
HKCU1005
SDI Output Expansion Unit
* : HKCU1003 is the option board for HDCU1000. It is not used for
HDCU1080.
B
Fuse holder
C
Board Board
(slot in (slot in
the front) the rear)
EN-159A VDA-64A
EN-159B VDA-64A
VDA-64B
VDA-64C
DRX-5 HIF-26
. IM/HDCU1000 Series