Table of Contents
Advertisement
Operation
8.3 Operation via the AOP30 operator panel
3. Press the <▲> or <▼> function key to select the "Screen 2 type" entry. Then press the
4. Press the <▲> or <▼> function key to select the "Screen 2 values" entry. Then press the
5. Press the <▲> or <▼> function key to select the first parameter. Then press the <Change>
6. Press the <▲> or <▼> function key to select the desired DO. Then press the <OK> key to
108
<Change> function key to select the desired display type.
<Change> function key to activate the setting.
– The display changes to the menu for entering the parameters.
function key to activate the setting. The display changes to the menu for selecting the
DriveObject (DO).
confirm the setting. The "Parameter selection" menu opens.
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE
Advertisement
Table of Contents
