Integrated Battery; Display - Bosch Bulls Cross Lite Evo Operating Instructions Manual

4
5
6
8
7
Figure 17: Details of pannier rack battery
1 Battery housing
2 Charging port for charger plug
3 Charging port cover
4 Battery lock
5 Key for the battery lock
6 Battery level indicator
7 On-Off button (battery)

3.1.5.3 Integrated battery

Two different types of pannier rack batteries can
be fitted:
PowerTube 400 PowerTube 500
(vertical/horizontal) (vertical/horizontal)
Table 9: Overview of integrated batteries
3
4
5
Figure 18: Details of integrated battery
MY20B01-22_1.0_21.06.2019
3
2
1
PowerTube 625
(vertical/ horizontal)
1
2
2
6
1 Key for the battery lock
2 Retainer guard
3 Securing hook
4 On-Off button (battery)
5 Battery level indicator
6 Integrated rechargeable battery housing
3.1.6

Display

The display has two buttons to display the main
drive system functions and the journey data. The
rider can switch off the drive system by removing
the display.
The pedelec's battery powers the display if the
display is inserted in the mount, a sufficiently
charged battery is inserted into the pedelec and
the drive system is switched on.
If the display is removed from its mount, power is
supplied from the display battery. If the display
rechargeable battery is low, a warning message is
shown on the screen.
If the on-board computer is removed from its
mount and not switched off, information on the last
trip distance travelled and status information will
be displayed after one another in a loop.
If no button is pressed after its removal from its
mount, the display will switch off after 1 minute.
The date and time will be maintained for a
maximum of six months without charging the
display rechargeable battery. When it is switched
on again, the date and time will be reset if there is
a Bluetooth connection to the app and successful
GPS localisation on the smartphone.
Overview
25