Nameplate - Bosch Bulls Cross Lite Evo Operating Instructions Manual

1.9

Nameplate

The nameplate is situated on the frame. You will
find the precise position of the nameplate in
Figure 2. You will find thirteen pieces of
Figure 1: Nameplate, example
No. Designation
1 CE marking
2 Manufacturer's contact details
3 Type number
4 Maximum continuous power
5 Permitted total weight
6 Year of manufacture
7 Pedelec type
8 Safety markings
9 Disposal instructions
10 Area of use
11 Model year
12 Weight of the ready-to-ride pedelec
13 Shut-off speed
MY20B01-22_1.0_21.06.2019
ZEG Zweirad-Einkaufs-
Genossenschaft eG
3
Longericher Str. 2
50739 Köln, Germany
20-16-0001
EPAC
nach
EN 15194
4
0,25 kW / 25 km/h
5
zGG 180 kg
EPAC 25 kg
BJ 2019 / MJ 2020
6
7
8
Description
The manufacturer uses the CE marking to declare that the pedelec complies with
applicable requirements.
You can contact the manufacturer at this address. You can find more information in
Section 1.1.
All pedelec models have an eight-digit type number, which is used to specify the design
model year, the type of pedelec and the version. You can find further information in
Section 1.9.1.
The maximum continuous power is the maximum power for the electric motor output shaft
during 30 minutes.
The permitted total weight is the weight of the fully assembled pedelec with the rider and
baggage.
The year of manufacture is the year in which the pedelec was manufactured. The
production period is from August 2019 to July 2020.
You can find further information in Section 1.9.3.
You can find more information in Section 2.6.
You can find more information in Section 9.
You can find further information in Section 1.9.4.
The model year refers to the first production year that the series-manufactured pedelec
was produced in the version and is not always identical with the year of manufacture.
The year of manufacture may be before the model year in some cases. If no technical
modifications are introduced to the series, production may continue of pedelecs from a
previous model year.
The indicated weight for a ready-to-ride pedelec refers to the weight of a pedelec at the
time of sale. The weight of each additional accessory must be added to this weight.
Speed reached by the pedelec at the moment when the current has dropped to zero or to
the no load current value.
About these operating instructions
information on the nameplate.
Typ:
2
1
13
12
11
10
9
11