Graco G3 Series Instructions Manual page 57
Max automatic lubrication pump, for dispensing of nlgi grades #000 to #2 greases and oil with at least 40cst, for professional use only, not approved for use in explosive atmospheres or hazardous locations
Hide thumbs
Also See for G3 Series:
- Instructions manual (60 pages) ,
- Instructions (4 pages) ,
- Instruction manual (77 pages)
Table of Contents
Advertisement
NOTE: When prelube is on, and the pump is pow-
ered-up, the pump will run this amount of lubrication
ON sequences.
3. Press the ENTER button to exit
Advanced Programming after the last
digit of the prelube sequence is dis-
played.
A13- MM:SS OFF Time
This function changes the programming of the OFF
Time.
OFF and Warning LEDs Illuminate
F
. 45
IG
1. The default OFF is
displayed.
OFF/Backup time in
setup mode is dis-
played in HH:MM
(Hours/Minutes).
332305J
2. Press the UP or DOWN
ARROW to change OFF to
ON on the display. The
OFF/Backup Time in setup
mode will be displayed in
MM:SS (Minutes/Seconds).
3. Press the ENTER button to exit
Advanced Programming.
Advanced Programming
57
Hide quick links:
Advertisement
Chapters
Table of Contents
