Operation / Data Log; System Event Log - Graco G3 Series Instructions Manual

Max automatic lubrication pump, for dispensing of nlgi grades #000 to #2 greases and oil with at least 40cst, for professional use only, not approved for use in explosive atmospheres or hazardous locations

Hide thumbs Also See for G3 Series:

Instructions manual (60 pages)

Instructions (4 pages)

Instruction manual (77 pages)

Table of Contents

Enlarged version

Operation / Data Log

During operation the G3 Pump stores information as

Log and Summary Files.

Logs contain the following information:

•

Log Name

•

DMS ID Number

•

Current Software Graco Part Number

•

Current Software Version

•

Date and Time of Upload

System Event Log

The System Event Log lists the date and time of the last

800 common system events such as pump cycles, man-

ual run and setting changes. The most recent event is

listed first.

The log file is stored in a folder structure created by the

pump DMS ID and download date. If multiple downloads

are done on the same date, the existing files will be writ-

ten over.

The folder structure is as follows:

GRACO/G3_{DMS_id}/{download date - YYYYm-

mDD}/EVENTLOG.CSV

Example: GRACO/G3_00025/20100911/EVENT-

LOG.CSV.

332305J

Sample System Event Log

Example Event Log 1: Pump cycle of a divider valve

system with a proximity switch set to detect 5 divider

valve cycles.

G3 System Event Log

DMS ID Number: 0025 (see page 40)

Software Part Number: 16F821

Software Version: 1019

09/29/2010 14:1400

Date

Time

Description

9/29/2010