Graco G3 Series Instructions Manual page 54

Advanced Programming
A7- Constant Alarm Output ON Fault
This function changes the behavior of the alarm output
in a fault from either toggling once every second
(default) or steady on.
Fault and Warning LEDs Illuminate
HH MM SS
ON
MM : SS
C
1
P
C
C
2
P
C
P
3
P
F . 39
IG
1. The default OFF is
displayed. The alarm
output will toggle
once a second.
2. Press the UP or DOWN
ARROW to change OFF to
ON on the display to change
the alarm output to be on
steady
3. Press the ENTER button to exit
Advanced Programming.
54
##
!
OFF
HH : MM
1 2 3
A8 - 4 Digit Hour OFF Time
Changes the OFF time from HH:MM to HHHH. Allows
for a maximum of 9999 hours of OFF time.
OFF LED illuminates.
F . 40
IG
1. The default OFF dis-
plays.
2. Press the UP or DOWN
ARROW button to change
OFF to ON on the display to
activate alarm condition.
3. Press the ENTER button to exit
Advanced Programming.
332305J