Table of Contents
Advertisement
TALLY LIGHTS
(no keys but indicators)
[|
Two tally lights, a red one on the left and a green one on the right,
The tally lights are controlled via the 9-pin connector named
TALLY & RIS on the rear side of the monitor.
A
A
CON
BRI
SAT
HUE
VOL °)
Control Function Keys.
BRI
SAT | | To control values between 050 (minimum) and 200 (maximum)
y
y
The calibrated value is 100 except for VOLume. VOLume has no
calibrated value and remains equal when pressing the CAL key.
X
Keys to set the status of the monitor.
get out of a Menu without storage.
°
VIDEO RF FUNC MENU °)
Keys to set the monitor in the corresponding
mode.
The actual mode is indicated by means of a LED above the key.
BACK LIGHT
[_srana name ]
Key to switch ON/OFF the back lighting of the keys.
Back lighting of this key is always on.
°) : keys described in detail elsewhere in this manual
Advertisement
Table of Contents
