Bios Main Menu - Xycom CHIP4e+ User Manual

CHIP4e+ Manual

BIOS Main Menu

Follow the instructions below to access the BIOS setup menus:
•
If the setup prompt is disabled on your system–which is the default–press
soon as the "Xycom Industrial BIOS vx.x" banner displays at the top of your
screen, and before your system loads the operating system.
•
If the setup prompt is enabled on your system (on the Boot Sequence submenu),
the BIOS displays the following message: "Press F2 to enter Setup."
As soon as this message appears, press
PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
System Time:
System Date:
Diskette A:
Diskette B:
IDE Adapter 0 Master
þ
IDE Adapter 0 Slave
þ
Video System:
Memory Shadow
þ
Boot sequence:
þ
Numlock:
þ
System Memory:
Extended Memory:
↑↓
F1 Help
←→ Select Menu
ESC Exit
Option
System Time (HH/MM/SS)
System Date (MM:DD:YYYY)
Diskette A or B
Video System
System Memory
Extended Memory
34
Security
[16:19:20]
[02/25/1998]
[1.44 MB, 3½" ]
[Not Installed]
(C: 1350 Mb)
(None)
[EGA / VGA]
[A: then C:]
[Auto]
640 KB
3 MB
Select Item -/+
Enter Select
Submenu
Description
Sets the real-time clock for hour, minute, and seconds. The hour is calculated according to
a 24-hour military clock (i.e., 00:00:00 through 23:59:59). Use
to move left. The
TAB
numeric keys, 0-9, are used to change the field values. It is not necessary to enter the
seconds or type zeros in front of numbers.
Sets the real-time clock for the month, day, and year. Use
move left. The
ENTER
keys, 0-9, are used to change the field values. It is not necessary to type zeros in front of
numbers.
Selects the floppy-disk drive installed in your system.
Selects the default video device.
Displays the amount of conventional memory detected during boot up. This field is not
user configurable.
Displays the amount of extended memory detected during boot up. This field is not user
configurable.
.
F2
Exit
Change Values
þ
key may be used to move from one field to the next. The
ENTER
key may be used to move from one field to the next. The numeric
F2 as
Item Specific Help
If the line item you are
viewing has specific help,
it will be listed here.
F9 Setup Defaults
F10 Previous Values
to move right;
TAB
to move right;
TAB
+
SHIFT
+ to
SHIFT TAB