Numlock Submenu - Xycom CHIP4e+ User Manual

CHIP4e+ Manual

Numlock Submenu

PhoenixBIOS Setup–Copyright 1985-95 Phoenix Technologies Ltd.
Main
Numlock:
Key Click:
Keyboard auto-repeat
rate:
Keyboard auto-repeat
delay:
↑↓
F1 Help
←→ Select Menu
ESC Exit
Option
Numlock
Keyboard Click
Keyboard auto-repeat rate
Keyboard auto-repeat delay
38
Keyboard Features
[Auto]
[Disabled]
[30/sec]
[1/2 sec]
Select Item
Description
Determines how the BIOS defines the numlock key at power up or soft reset. Normally,
the BIOS sets the numlock (numeric keys selected) if it detects a 101- or 102-key
keyboard at power up. If an 84-key keyboard is detected, numlock is turned off (cursor
keys selected). Select "Auto" to keep this state; "On" to select the numeric keys,
regardless of keyboard; or "Off" to select the cursor keys, regardless of keyboard.
Provides audible key-press feedback by causing the BIOS to click through the system
speaker every time a key is pressed, if enabled. This option is only valid for systems with
a speaker connected to the speaker jack.
Defines the rate at which the keyboard repeats while a key is pressed. The higher the
number, the faster the key repeats.
Sets the delay time after a key is held down, before it begins to repeat the keystroke.
-/+ Change Values
Enter Select
þ
Submenu
Item Specific Help
If the line item you are
viewing has specific
help,
it will be listed here.
F9 Setup Defaults
F10 Previous Values