Components And Operator's Controls - Remote Control Unit - Wacker Neuson DPU80 Series Operator's Manual

6.3 Components and operator's controls – remote control unit
The remote control of the DPU80r, DPU90r and DPU110r may only be used for these machines.
1
3
11 10 9
Item Designation
1 Joystick (left, right)
2 Socket for charging cable
3 Carrying strap
4 Rechargeable battery
5 Spot compaction button
6 Button for slow/fast operation
Joystick (left, right)
By pressing the joystick, the vibration starts, and the machine moves.
ON/OFF switch
The remote control unit is switched on via the ON/OFF switch. When switching off, the remote control
and the engine are turned off.
Engine start button
The start button starts the engine.
Button for slow/fast operation
The slow/fast button is used to switch between slow and fast operation. Fast operation is selected by
default.
Quick mode – operating mode for compacting.

Slow operation – mode with reduced engine speed to traverse highly compacted or hard surfaces.

Spot compaction button
The spot vibration button must remain pressed so that the machine compresses on the spot.
Carrying strap
The carrying strap is used to hang the remote control.
Rechargeable battery
The rechargeable battery powers the remote control unit. The rechargeable battery can be recharged
with the charging cable of the machine or with an external battery charger.
Control lamps
Charging
The control lamp for charging lights up green when the rechargeable battery is charging.

The control lamp for charging goes out once the rechargeable battery is charged.

100_0202_cp_0006.fm
2
1
8 7 6 5
4
6 Components and operator's controls
3
Item Designation
7 Engine start button
8 ON/OFF switch
9 Control lamp for charging
10 Control lamp for operation
11 Diagnostic control lamp
23