Operation And Use; Before Commissioning - Wacker Neuson DPU80 Series Operator's Manual

8

Operation and use

WARNING
Improper handling may result in injury or serious material damage.

8.1

Before commissioning

8.1.1 Inspection before commissioning
Open protective hoods
Item Designation
1 Hood opener of rear protective hood
1. Pull hood opener of rear protective hood until it is unlocked. Completely open protective hood.
2. Pull hood opener of front protective hood until it is unlocked. Completely open protective hood.
Complete the following inspections:
Check the machine and components for damage. If there is any visible damage, do not use the

machine and immediately contact the Wacker Neuson service.
Ensure that loose packaging material has been removed from the machine.

Ensure that there are no loose items under the protective hoods, e.g. gloves or tools.

Check fuel level.

Check the engine oil level.

Check hydraulic oil level.

Check the fuel lines for leak tightness.

Check to ensure the screwed connections are firmly seated.

Ensure that the receiving units are free of dirt accumulation.

NOTICE
Perform control procedures according to the Maintenance chapter. If necessary, top off
missing fuel, lubricants and coolants, see chapterTechnical Data.
100_0202_op_0011.fm
Please read and follow all safety instructions in this operator's manual.
1
2
Item Designation
2 Hood opener of front protective hood
8 Operation and use
27