134
Appendix C: Error and Warning
Messages
BiST: Built in Self-Test
The BiST error flags are binary flags with each bit being independent from each other. The message from
the BiST should be "Good" meaning everything is functioning correctly but if a hardware failure does
occur in the camera one or more these flags could be set. Any of these errors will result in the status light
turning red.
Definition
I2C error
Unable to configure fpga
Unable to configure fpga
EXT_SRAM Failure
ECHO_BACK Failure
FLASH_TIMEOUT
FLASH_ERROR
NO_FPGA_Code
NO_COMMON_SETTINGS
NO_FACTORY_SETTINGS
NO_USER_SETTINGS
NO_FLAT_FIELD Corrections
NO MISC corrections
NO_FPN Correction
NO_FPN Correction
NO_PRNU Correction
NO_FEED Through Correction
NO_LINEARITY Correction
SYNC_ERROR
OVER_TEMPERATURE
SPI Failure
NO_USER_FPN
PLL_LOCK_FAILED
INVALID_CCI
No LUT
Incompatible FPGA code
03-032-20180-06
Piranha4 2K and 4K Camera Color User's Manual
BiST Flag
1
10
100
1000
1,0000
10,0000
100,0000
1000,0000
1,0000,0000
10,0000,0000
100,0000,0000
1000,0000,0000
1,0000,0000,0000
10,0000,0000,0000
100,0000,0000,0000
1000,0000,0000,0000
1,0000,0000,0000,0000
10,0000,0000,0000,0000
100,0000,0000,0000,0000
1000,0000,0000,0000,0000
1,0000,0000,0000,0000,0000
10,0000,0000,0000,0000,0000
100,0000,0000,0000,0000,0000
1000,0000,0000,0000,0000,0000
1,0000,0000,0000,0000,0000,0000
10,0000,0000,0000,0000,0000,0000
Teledyne DALSA