Dalsa Piranha4 Series Manual page 117

Piranha4 2K and 4K Color Camera User's Manual
Full Name Set Horizontal Alignment Mode
Mnemonic SHM
Argument(s)
Selector
Description
Enable the horizontal correction
Notes
Full Name Mirroring
Mnemonic SMM
Argument(s) Mode
Description Set mirroring mode
Notes
Full Name Pixel Format
Mnemonic SPF
Argument(s) Selector
Description Set pixel format
Notes
Full Name Set Line Delay
Mnemonic SSA
Argument(s)
# of lines
Description Sets the number of lines of delay between colors that are read out from the sensor
(default 3).
Notes
If your line rate matches the speed of the object, then the value of the line delay will be
3. Adjust the ssa value until you remove the red and blue halos above and below a black
on white horizontal line in order to set the line delay. Values entered must be between 0
and 5. Decimal places are valid for sub-pixel correction.
Teledyne DALSA
0. Off
1. On
0. Off
1. Image is flipped on the vertical axis
0. RGB8
1. RGB10
2. RGB12
3. BGR8
BGR12
5.
6. RGB8+mono8
7. BGR8+mono8
8. RGB12+mono12
9. BGR12+mono12
0 to 5
117
(Trilinear & Quadlinear)
(Trilinear & Quadlinear)
(Trilinear & Quadlinear)
(Trilinear & Quadlinear)
(Trilinear & Quadlinear)
(Quadlinear only)
(Quadlinear only)
(Quadlinear only)
(Quadlinear only)
03-032-20180-06