Dalsa Piranha4 Series Manual page 61

Piranha4 2K and 4K Color Camera User's Manual
If the external line rate exceeds 70 kHz the camera will continue to output data at its maximum line rate
of 70 kHz. Though no image artefacts associated with over-speed will occur, you may notice that under
over-speed conditions the image will appear compressed and the apparent distance travelled will be
reduced.
Parameter
Line Rate (in Hz)
Camera Link Configuration
Base
Medium
Full
Deca
Note: 70 kHz line rate can be achieved using AOI mode for all Camera Link Mode. For more information, see
(AOI) Setup.
Teledyne DALSA
Camera Control
Camera line rate in a range from 0 Hz to 70 KHz.
This feature is only available when the camera is in Internal Mode—
line trigger is disabled (Trigger Mode off).
Line Rates
20 kHz (4k models)
40 kHz (2k models)
41 kHz (2k models only)
55 kHz (4k models only)
68.5 kHz (Deca RGB8)
Description
Maximum Line Rate
61
Area of Interest
03-032-20180-06