Dalsa Piranha4 Series Manual page 83

Piranha4 2K and 4K Color Camera User's Manual
Internal sensorScanDirection
Direction
Forward
Reverse
Gain Selector GainSelector
SystemGain
Red
Green
Blue
Mono
Gain Gain
Offset BlackLevel
Color colorTransformationSelector
Transformatio
Selector
WhiteLEDFactorySet
NoCorrectionFactorySet
MatrixUserSet1
MatrixUserSet2
Color ColorTransformationValueSelector
Transformation
Gain00
Value Selector
Gain01
Gain02
Gain10
Gain11
Gain12
Gain20
Gain21
Gain22
Offset1
Offset2
Offset3
Color ColorTransformationValue
Transformation
Value
Teledyne DALSA
When ScanDirectionSource set to Internal,
determines the direction of the scan
Selects which gain is controlled when adjusting
gain features.
Apply a digital gain adjustment to the entire
image
Apply a digital gain adjustment to the red
channel only
Apply a digital gain adjustment to the green
channel only
Apply a digital gain adjustment to the blue
channel only
Apply a digital gain adjustment to the mono
channel only
Sets the selected gain as an amplification factor
applied to the image.
Controls the black level as an absolute physical
value. This represents a DC offset applied to the
video signal, in DN (digital number) units.
Allows the user to select between two factory
programmed matrixes or two user loaded sets
Color Correction Matrix for a white LED
No correction
User programmable/loaded correction matrix
User programmable/loaded correction matrix
Allows the user to manually adjust correction
value in the matrix
Red Green
Red Gain00 Gain01
Green Gain10 Gain11
Blue Gain30 Gain31
Value entered as pointed to by
ColorTransformationValueSelector, -16 < value
< 16
83
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
Blue Offset
Gain02 Offset1
Gain12 Offset2
Gain32 Offset3
1.00
Beginner
03-032-20180-06