Dalsa Piranha4 Series Manual page 110

110
Full Name
Mnemonic FCS
Argument(s)
File selector
Description 


Notes 1.
2.
3.
4.
5.
6.
7.
Full Name Flatfield Mode
Mnemonic FFM
Argument(s) Mode
Description Set flat field mode
Notes
Full Name Set Flatfield Scan Direction Reverse Set
Mnemonic FRS
Argument(s) User Set Number
Description Set scan direction controlled reverse set
Notes
03-032-20180-06
Upload file to camera using Xmodem protocol (HyperTerminal)
User set, PRNU, FPN, and color correction matrix are saved in the currently
active set
Location to save color correction matrix is specified with CMS command
Enter "FCS <#>" command from HyperTerminal
Click on "Transfer"
Browse and find file
Select "Xmodem" protocol
Click "Send"
When it indicates that it is done click "Close"
Upload all files and then reset camera
Piranha4 2K and 4K Camera Color User's Manual
0. User Set
1. User PRNU
3. FPGA
4. Microcode
5. CCI
6. XML
15. User FPN
16. Color correction matrix
0. Disable use of user FPN and PRNU flat field
correction coefficients
1. Enable use of user FPN and PRNU flat field
correction coefficients
2. Reset user FPN coefficients to zero and user
PRNU coefficients to one
3. Scan direction controlled user set loading
1 to 8
Teledyne DALSA