Dalsa Piranha4 Series Manual page 119

Piranha4 2K and 4K Color Camera User's Manual
Full Name Test Pattern
Mnemonic SVM
Argument(s)
Mode
Description
Select test pattern
Notes 
Full Name Default User Set
Mnemonic USD
Argument(s)
Set selector
Description Select user set to load when camera is reset
Notes 
Full Name Load User Set
Mnemonic USL
Argument(s) Set selector
Description
Load user set
Notes 
Full Name Save User Set
Mnemonic USS
Argument(s)
Set selector
Description
Save user set
Notes 
Full Name Temperature
Mnemonic VT
Argument(s)
Description
Display internal temperature in degrees Celsius
Notes
Teledyne DALSA
When a test pattern is selected all digital processing (e.g. flat field, gain) is
disabled – it is re-enabled when sensor video is selected
The settings include all those listed by the GCP command plus the user FPN
coefficients, user PRNU coefficients, and color correction matrix
Loads and makes current all the settings listed by the GCP command plus the
user FPN coefficients, user PRNU coefficients, and color correction matrix
Saves all the current settings listed by the GCP command plus the user FPN
coefficients, user PRNU coefficients, and color correction matrix
0. Off – sensor video
1. Ramp
2. Color Ramp
0. Factory set
1-8. User sets
0. Factory set
1-8. User sets
1 to 8
119
03-032-20180-06