Dalsa Piranha4 Series Manual page 38

38 Piranha4 2K and 4K Camera Color User's Manual
RGB 8 bit CL Full, maximum line rate 55 kHz (4k only), no AOI and 85 MHz CL clock
Note: The inserted dummy pixels at the end.
This timing can be used for applications that require line rates up to 55 kHz and therefore must use
Camera Link Deca mode and two cables.
The RGB output format is not defined in the Camera Link specification Full. The RGB format is such that
when using a Camera Link frame grabber compatible with the Full format configured for the mono
standard, the R, G and then B pixels will be written sequentially into the frame grabber buffer. This
process simplifies the extraction of the RGB data from the frame grabber buffer by the host application.
Line rates up to 70 kHz can be achieved by using the Area of Interest (AOI) feature; where the smaller the
AOI, the greater the potential line rate.
03-032-20180-06 Teledyne DALSA