Easy To Create The Device Configuration - Siemens SIMATIC S7-1200 Manual

Easy to create the device configuration

You create the device configuration for your PLC by adding a CPU and additional modules to
your project.
①
②
③
④
⑤
To create the device configuration, add a
device to your project.
 In the Portal view, select "Devices &
 In the Project view, under the project
Easy Book
Manual, 11/2011, A5E02486774-04
Communications module (CM): Up to 3, inserted in slots 101, 102, and 103
CPU: Slot 1
Ethernet port of CPU
Signal board (SB): up to 1, inserted in the CPU
Signal module (SM) for digital or analog I/O: up to 8, inserted in slots 2 through 9
CPU 1214C allows 8, CPU 1212C allows 2, CPU 1211C does not allow any
Networks" and click "Add device".
name, double-click "Add new device".
5
71