2.3
Easy to add inputs or outputs to LAD and FBD instructions
● To add an input or output, click the "Create" icon or right-click on an input stub for one of
● To remove an input or output, right-click on the stub for one of the existing IN or OUT
2.4
Expandable instructions
Some of the more complex instructions are expandable, displaying only the key inputs and
outputs. To display the inputs and outputs, click the arrow at the bottom of the instruction.
Easy Book
Manual, 11/2011, A5E02486774-04
Some of the instructions allow you to create additional inputs or outputs.
the existing IN or OUT parameters and select the "Insert input" command.
parameters (when there are more than the original two inputs) and select the "Delete"
command.
2.3 Easy to add inputs or outputs to LAD and FBD instructions
STEP 7 makes the work easy
29