Use the "Properties" task card of the code block to bind the block to a specific CPU or
memory card.
1. After opening the code block, select "Protection".
2. From the drop-down list under "Copy protection" task, select the option to bind the code
3. Select the type of copy protection and enter the serial number for the memory card or
Easy Book
Manual, 11/2011, A5E02486774-04
block either to a memory card or to a specific CPU.
CPU.
Note
The serial number is case-sensitive.
Easy to create the device configuration
5.6 Protecting access to the CPU or code block is easy
85