Timer Program To Control The Dhw Temperature; Changing The Comfort Hot Water Temperature - DeDietrich AMC Pro 45 Service Manual

5 User instructions
Fig.12 Weekday
A
11:20 ... ..... .... ...... .... ...... ....
................
..:.. ........ ....
B
..:.. ........ ....
C
....... ...........
..... ... ....... ....
........ .......
16 AMC Pro
1. Select the tile [
2. Select
3. Set the duration in hours and minutes.
5.7.3
A timer program allows you to vary the domestic hot water temperature
per hour and per day. The hot water temperature is linked to the activity of
the timer program.
1. Select the tile [
2. Select
3. Select the timer program you want to modify: Schedule 1, Schedule 2
4. Select the weekday you want to modify.
A Weekday
B Overview of scheduled activites
C List of actions
..............
5. Perform the following actions, if necessary:
AD-3001384-01
In order to use a DHW timer program, it is necessary to activate the
operating mode Scheduling. This activation is done separately for each
zone.
1. Select the tile [
2. Select
3. Select DHW timer program Schedule 1, Schedule 2 or Schedule 3.
5.7.4
You can change the comfort hot water temperature in the timer program.
1. Select the tile [
2. Select
3. Set the comfort hot water temperature.
You can also change the reduced hot water temperature via:
configuration > Domestic Hot Water Setpoints > DHW reduced setpoint:
The DHW temperature when the hot water production is switched off.
Important
The domestic hot water temperature can only be adjusted in this
way if a domestic hot water sensor is installed.
].
Hot water boost.
The temperature is increased to the DHW comfort setpoint.

Timer program to control the DHW temperature

Creating a timer program
Important
You can create up to three timer programs. For example, you can
create a program for a week with normal working hours and a
programme for a week when you are at home most of the time.
].
Zone configuration > DHW Schedule.
or Schedule 3.
Activities scheduled for Sunday are displayed. The last scheduled
activity of a day is active until the first activity of the next day. The
scheduled activities are shown. At initial start-up, all weekdays have
two standard activities; Comfort starting at 6:00 and Reduced
starting at 22:00.
5.1. Edit the start time and/or activity of a scheduled activity.
5.2. Add a new activity.
5.3. Delete a scheduled activity (select the activity Delete).
5.4. Copy the scheduled activities of the weekday to other days.
5.5. Change the temperature linked to an activity.
Activating a DHW timer program
].
Scheduling.

Changing the comfort hot water temperature

].
DHW comfort setpoint: The DHW temperature when the hot
water production is switched on.
Zone
7725087 - v.01 - 06062019