Changing The Dhw Temperature; Setting The Timer Program - DeDietrich INNOVENS PRO User And Installation Manual

4 User instructions
Fig.30 Step 4
Fig.31 Step 5
4.4

Changing the DHW temperature

Fig.32 Step 1
Fig.33 Step 2
Fig.34 Step 3
4.5

Setting the Timer Program

Fig.35 Step 2
Fig.36 Step 3
Fig.37 Step 4
12
4. Press the
MW-3000369-01
5. Press the
Important
The flow temperature is matched automatically when using a:
MW-3000370-01
weather-dependent regulator
OpenTherm regulator
The temperature of the domestic hot water can be changed as needed.
1. Press the
MW-3000371-01
2. Press the
MW-3000368-01
3. Press the
MW-3000369-01
If a timed thermostat is not being used, the timer program for the appli­
ance can be used. The Timer Program can be used to lower the heating
temperature during the night or an absence during the day. A start and
end time for the lower temperature can be set in the Timer Program.
Note
Activate the timer program using the parameter:
The timer program can be set for each zone (heating, domestic
hot water or cooling).
1. Navigate to the Counter menu.
2. Press the
MW-3000320-01
3. Keep pressing the
MW-3000404-01
4. Press the
The icons dedicated to the days of the week all flash at the same
time:
MW-3000405-01
key to confirm the value.

key to go back to the main display.
key to select the domestic flow temperature.
or key for the required DHW temperature.
key to confirm the value.
key to open the menu.
key until the required zone is displayed.
key to confirm the selection.
.
7667004 - v.01 - 12072017