Preface - Sun Microsystems SPARC Enterprise M4000 Installation Manual

Preface

®
The Sun SPARC Enterprise M4000/M5000 Servers Installation Guide describes how to
install and set up the Sun SPARC Enterprise M4000/M5000 midrange servers.
References herein to the SPARC Enterprise M4000 server are references to the Sun
SPARC Enterprise M4000 server. References herein to the SPARC Enterprise M5000
server are references to the Sun SPARC Enterprise M5000 server.
Note – Refer to the Sun SPARC Enterprise M4000/M5000/M8000/M9000 Servers
Glossary for definitions of terms used in this document.
This document is written for technicians and authorized service providers (ASPs).
This document assumes that the system has already been unpacked and mounted in
an equipment cabinet.
How This Document Is Organized
This document is organized into the following chapters:
Chapter 1 provides a flowchart of the installation process.
Chapter 2 provides important safety and tools information.
Chapter 3 provides instructions on how to connect power cables and configure the
system so that it can connect to the administrative network.
Chapter 4 provides instructions on how to connect the system to the local area
network.
Appendix A provides illustrations of the system.
vii