Sun Microsystems SPARC Enterprise M4000 Installation Manual page 31

Hide thumbs Also See for SPARC Enterprise M4000:

Table of Contents

6. Confirm that the XSCF STANDBY LED (green) on the operator panel is lit.

Note – Step 8 must be performed within a minute of Step 7 or the login certification

will time out.

7. When the login prompt appears, enter default for the login name:

8. Set the key on the operator panel to the Locked position.

9. Press the RETURN key.

Wait five seconds before continuing to Step 10.

10. Set the key on the operator panel to the Service position and press the RETURN

key.

Note – If Step 10 is not performed within 1 minute the login certification will expire.

11. Confirm that the XSCF Shell prompt is displayed on the administration console.

XSCF>

Chapter 3 Installing the Server

3-7

Table of Contents

Chapters

Table of Contents

Do you have a question about the SPARC Enterprise M4000 and is the answer not in the manual?

Sparc enterprise m5000