Discharge Air Louver Control - Carrier P5 Series Owners And Installation Manual

UNIT OPERATION

DISCHARGE AIR LOUVER CONTROL

Up and Down Control
The air discharge direction can be controlled to swing up and down and can be fixed at a preferred position or at automatic position by the remote control.
• If you select the flap position using the FLAP button in the remote control, the flap in the unit
will move to that position automatically.
Once you select the position, the unit remembers that position and whenever you turn on
the unit, the flap will be positioned to that position.
• If you select SWING, the flap will swing up and down. In the COOL, DRY and FAN mode,
the flap will swing in the cool range. In the HEAT mode, the flap will swing in the heat range.
• If you select AUTO, the flap will position itself to the preset position according to the operation mode.
Left and Right Control
If you want to adjust the direction of the discharge air left or right, Pressing the
'vertical louver' button. The button will set the swing on and off.
NOTE
• Please do not fix the flap at position
minimizes air circulation resulting in uneven room temperature.
• Do not adjust the flap by the hand during SWING operation because it may
damage the air swing mechanism.
• If you want maximum cooling or heating capacity, please set flap at position
CLOSE
Remote Control
for a long time, because this position
COOL
Swing Range
HEAT
NOTE
• Always use the remote control to adjust the flap position,
otherwise it may cause abnormal operation.
Please turn off the unit and turn it on again when you
manually adjust the flap out of range.
. Vertical louver button
Auto Position
HEAT
Horizontal Louver setting 6 and
Vertical Louver Swing Indicater
Time 1sec
Swing on
Swing off
1sec
15