Carrier P5 Series Owners And Installation Manual page 8

BEFORE OPERATION
Replacing Batteries
1
Remove the cover of the battery compartment at the back
of the remote control by sliding it out in the direction of the arrow.
2
Remove the used batteries and insert new batteries. The remote
control uses two batteries.(1.5V(L)R03x2)
3
Press reset button with a sharp object if the remote control is not
operating properly or after replacing the batteries.
NOTE
• Changing batteries should be done after turning off the unit.
6
Setting Current Time and Reset
4
With the remote control On or OFF, press button
5 seconds
5
The current hour figure flashes.Press either button
set the current hour. Press button
set them.
6
For this setting always use either button
7
Once the current time is set, press button
for more than
or to
to move to minutes and
or .
to confirm it.