Discharge Air Louver Control - Carrier G Series Heating Owner's Manual

Split system air conditioner heating
Table of Contents

Advertisement

UNIT OPERATION

DISCHARGE AIR LOUVER CONTROL

Up and Down Control
The air discharge direction can be controlled to swing up and down and can be fixed at a preferred position or at
automatic position by the remote control.
AUTO
SWING
• If you select the Flap position using the FLAP button in the remote control, the flap in the unit will move to that
position automatically. Once you select the position, the unit remembers that position and whenever you turn
on the unit, the flap will be positioned to that position.
• If you select SWING, the flap will swing up and down. In the COOL, DRY and FAN mode, the flap will swing in the
cool range. In the HEAT mode, the flap will swing in the heat range.
• If you select AUTO, the flap will position itself to the preset position according to the operation mode.
• Always use the remote control to adjust the flap position, otherwise it may cause abnormal operation.
Please turn off the unit and turn it on again when you manually adjust the flap out of range.
Left and Right Control
If you want to adjust the direction of the discharge air left or right, adjust the vertical louver with the handle after
opening the flap.
• Please do not fix the flap at position
uneven room temperature.
• Avoid the discharge air being directed towards the occupants for a long period of time.
• Do not adjust the flap by the hand during SWING operation because it may damage the air swing mechanism.
CLOSE
Fixed
for a long time, as this position minimizes air circulation resulting in
COOL
Swing Range
HEAT
NOTE
HANDLE
NOTE
,
OWNER
S MANUAL - 20
COOL
Auto Position
HEAT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G series

Table of Contents