Discharge Air Louver Control - Carrier 53 KLN 009 Owner's Manual

53 KLN 009/012 - 53 QNL 009/012
Unit operation

Discharge air louver control

Up and Down Control
The air discharge direction can be controlled to swing up and down and can be fixed at preferred position or Automatic position by the
remote controller.
FLAP
6
AUTO
5
4
SWING
3
1 2
Remole controller
• If you select the Flap position using FLAP button in the remote
controller, the flap in the unit will move to that position
automatically. Once you select the position, unit remembers that
position and whenever you turn on the unit, the flap will be
positioned to that position.
• If you select SWING, the flap will swing up and down. In the
COOL, DRY, FAN mode, the flap will swing in the cool range. In
the HEAT mode, the flap will swing in the heat range.
• If you select AUTO, the flap will position to the preset position
according to the operation mode.
Left and Right Control
If you want to adjust the direction of discharge air left and right,
adjust the vertical louver with the handle after opening the flap.
GB - 14
CLOSE
6
5
4
COOL
3
2
1 HEAT
Fixed
NOTE:
1. Always use the remote controller to adjust the flap position,
otherwise it may cause abnormal operation. Please turn off
the unit and turn on again when you adjust the flap out of
range manually.
2. When you adjust the flap manually, follow the indicating
label in the left side of flap. The blue zone is for COOL and
DRY modes, the red zone is for HEAT mode.
3. The unit can have maximum capacity when the flap locate at
NOTE:
• Please do not fix the flap vertically for a long time.
• Please avoid the discharge air being directed towards the
occupants for a long time.
• Do not adjust the flap by the hand during AUTO SWING
operation because it may damage the air swing function.
COOL
6
6
5
4
3
HEAT
2
1
Swing Range
position or black line in the label of unit.
HANDLE
2
Auto Position