RTxxx LED lighting controllers - User Manual
trg is displayed. Press the SEL button.
Use the p and q buttons to select the trigger
(IP1 or IP2) you want to set up, and press the
SEL button.
To set the trigger polarity so that it is active high,
press the SEL button with F P displayed.
Or...
If you wish to set the trigger polarity so that it is
active low, use the p and q buttons to select
F-P and press the SEL button.
To set the error detection, press the SEL button
with F E displayed.
Or...
—
40
—
WWW.STEMMER-IMAGING.COM